Replacement recliner chair lever handle with cable which releases the footrest of the recliner. Plastic housing and cable sold as a set only. Available in two different cables, tail lengths, a 67mm short-tail and 115mm long-tail - Refer to our Measuring Guide under the 'Extended Information' tab below.
|
Features:
- Cable & Housing sold as a set.
- Cable length is the 67mm short-tail – see Measuring Guide under the 'Extended Information' tab.
Technical Specs:
How To Instructions:
Measuring Guide:
- Cable Length: Measure from the round barrel 'T' shape, inside the plastic housing to the end of the 'S' fitting.
- Tail Length: Measure in a straight line from the end of the black plastic activator tab to the inside of the 'S' fitting - it will measure either 67mm (short-tail) or 115mm (long-tail).
How to use a Recliner Lever with a Long Tail as a Short Tail:
- The image below shows how the cable looks if it is the correct length.
- If the cable is too long, wrap the cable around the recliner mechanism 'stirrup' and the 'z' clip inserted into the hole from the front.
|
|