 |
Slat tensioners enable you to adjust the firmness of each individual bed slat, independently, so you can add support where you need it most. Our beige slat tension adjuster works with 38mm wide slats. Simply position a shorter 38mm tensioner slat beneath your existing 38mm bed slat and slide on 2 slat tensioners. Adjust the firmness by sliding the plastic tension adjusters closer together, towards the middle of the bed slat to soften the firmness. Push the tensioners further apart to increase firmness. Slat tensioners fit two slats in a column with a minimum height of 14mm and a maximum combined height of 17mm in total. Minimum order quantity 2 units.
- Colour: Beige
- Use with: 6mm thick & 38mm wide Tensioner Slat
- Total Combined Thickness of a Standard Slat and Tensioner Slat: 17mm e.g., an 8mm and 6mm slat combo, 9mm and 6mm, 10mm and 6mm, two 8mm slats or a 9mm and 8mm slat combination.
- Minimum Qty: 2
- Place a shorter 38mm tensioner slat beneath your existing 38mm bed slat and slide on 2 slat tensioners.
- FIRM Support: Adjust the firmness by sliding the plastic tension adjusters closer together, towards the middle of the bed slat to soften the firmness.
- HARD Support: Push the tensioners further apart to increase firmness.
- Slat tensioners fit two slats in a column with a minimum height of 14mm and a maximum combined height of 17mm in total.
|
|
|